If you live in an area that gets lots of floods and rainfall, probabilities are that your carpets may get water damaged.
Water damage is horribly messy, even in the least of situations. Not only it can leave your carpets appearing bad, it also can really lead to different types of health hazards. If you don’t attend the wet carpet for a long period of time, chances are it will lead to additional problems such as mildew and mold. Mildew and mold can cause allergic reactions and lead to more major problems such as lung disease.
If your house or business has suffered from a major problem like water damage, then it’s absolutely crucial that you take action within 2 days of the carpet getting wet.
While there are people who spend a lot of money annually in order to fix and restore the water damaged carpets, you can easily restore your water damaged carpets on your own. If you want to know how to clean up water damaged carpet, the water remediation process given here will certainly help to learn how to clean carpet after water damage.
1) Recognize the Source of the Carpet Water Damage
To start the water remediation process, identify the source of the water. There are 2 kinds of water – Sanitary and Unsanitary. Sanitary water comes from piped water and rain while the unsanitary water comes from overflowing toilets and other contaminated sources. Carpets that are damaged by raw sewage or groundwater ought to be discarded.
Once you have identified the sources of the water, you must block it or shut off the water right at its source in order to prevent more damages to the carpet. In case you experience some problems with blocking the water, then you must seek the plumber services so that they can block the water source permanently.
2) Measure the Carpet Water Damage
Once you shut off the water, assess the damage done to distinguish what area requires to be attended to first. Once it’s done, immediately start removing excess water from the carpet. Remove as much water as you can. Excess water removal from carpet is generally done using wet-dry vacuum units or high powered pumps. This is known as carpet water extraction.
Sterilize the stained part by brushing it with a cleansing suspension created from 2 or 3 teaspoons of bleach liquefied in a water gallon. Make sure that the entire room windows are opened because the fumes formed can be poisonous.
3) Treating Damaged Carpet Area
With a utility knife, cut all-around the drenched areas. Now, raise the carpet and eliminate the padding beneath it. Next, clean the underneath flooring. The left water under the carpet is the ideal breeding ground for carpet mold. Carpet mold remediation is very hard and it must actually only be done by a professional because of the health hazards.
If there are chairs and table in the room, then it must be moved to another room in order to give you some space to work. Open all doors and windows to circulate the air as much as possible, and to remove excess moisture.
4) Drying the Soiled Carpet
Put an industrial-sized fan in the room and direct it towards the drenched part. Run it at optimum speed for a minimum of 40 hours once the wet carpet has been drenched. To prevent electrocution incidences, make sure that the electric wires are kept away from the wet areas. When drying the wet carpet, it is best to allow the carpet lay flat. If the wet carpet is not dried flat, it’ll be hard reinstall since it will no longer fit correctly.
You can use a dehumidifier to make sure that the carpet drying process takes a little time.
Try maximum to reduce foot traffic in the area in order to make sure that the carpet dries properly. Reducing foot traffic guarantees that the air flow is optimum to the wet parts, hence, stopping it from weakening.
Once everything has been done, make sure the carpet is cleaned professionally, sanitized, and disinfected. This helps to reduce any probability of mold growing and remove any odors.